Programmable Through Hollow Shaft Incremental Encoder with Stator Coupling ø63 mm; Bore ø14 mm, Clamping Ring on A-side; Supply Voltage: 4.75 to 30 VDC, TTL/RS422 compatible (Vout=5V) or HTL/Push-Pull, 6 channel; Programmable from 1 to 65536 ppr; IP 65; 2-Meters prewired PVC Shielded Cable, Radial Outlet

Programmable Through Hollow Shaft Incremental Encoder with Stator Coupling ø63 mm; Bore ø15 mm, Clamping Ring on A-side; Supply Voltage: 4.75 to 30 VDC, TTL/RS422 compatible (Vout=5V) or HTL/Push-Pull, 6 channel; Programmable from 1 to 65536 ppr; IP 65; Flange Socket Radial, M12, 8-pin, Male Contacts, CCW

Through Hollow Shaft SingleTurn SSI Absolute Encoder; Without Stator Coupling; Bore Dia. 14mm, Clamping Ring on A-Side, without Pin; Supply Voltage: 10 to 30 Vdc; Interface: SSI; Output Signal: Binary Code; Absolute Resolution: 14-Bit ST; Without Incremental Output; Connection: Flange Connector Radial M23, 12-Pin; IP 54

Through Hollow Shaft SingleTurn/MultiTurn Absolute Encoder; Clamping Ring without Pin on Flange, A-Side; Bore Dia. 12 mm; Supply Voltage: 10 to 30 Vdc; Interface: Profibus-DPV0; Absolute Resolution: 13-Bit ST+16-Bit MT; Without Incremental Output; Connection: Bus Cover with 3xCable Gland; IP 54

Through Hollow Shaft SingleTurn/MultiTurn Absolute Encoder; Flange mounting; Bore Dia. 16 mm with Pin 15 mm; Supply Voltage: 10 to 30 Vdc; Interface: Profibus-DPV0; Absolute Resolution: 13-Bit ST+16-Bit MT; Without Incremental Output; Connection: Bus Cover with 3xCable Gland; IP 54 (standard)

Through Hollow Shaft HeavyDuty Incremental Encoder; Bore Dia. 40mm (40H7x53mm); Supply Voltage: 9 to 26 Vdc; Output Signals: HTL-C with Inverted Signals (6-Channels); 1024 ppr; Connection: 1-Meter prewired Cable - Radial outlet; IP 54

Through Hollow Shaft HeavyDuty Incremental Encoder; Bore Dia. 24mm (24H7x53mm); Mounting with Clamping Ring on Front Side; Supply Voltage: 9 to 26 Vdc; Output Signals: HTL-C with Inverted Signals (6-Channels); 1024 ppr; Terminal Connection - Radial exit; IP 56

Through Hollow Shaft HeavyDuty Incremental Encoder; Bore Dia.16mm (16H7x69.5mm); Supply Voltage: 9 to 26 Vdc; Output Signals: HTL-C with Inverted Signals (6-Channels); 2048 ppr; Terminal Connection - Radial exit; IP 54

Through Hollow Shaft Incremental Encoder, Body Dia. 58mm, Bore ø14 mm, Clamping Ring on A-side; Supply Voltage: 8 to 30 Vdc; HTL/Push-Pull; 6-Channels; 512 ppr; IP 65; Connection: Board Connector Type 21, Pin Contacts, Straight, 8-Pin