3-Phase SCR Thyristor Power Regulators- Electrowebstore

View as List Grid

Page

You're currently reading page 1
Page 2
Page 3
Page 4
Page 5
Page Next

W5-TP4V-030-20J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 0 to 5 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-030-21J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 1 to 5 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-030-22J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 2 to 10 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-030-23J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 0 to 10 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-030-24J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 4 to 20 mA; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-030-25J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 30 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 0 to 20 mA; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-045-20J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 45 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 0 to 5 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-045-21J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 45 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 1 to 5 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1
W5-TP4V-045-22J

Data Sheet
Sipin

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 45 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 2 to 10 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.
Independent adjustment of Max and BIAS

Downward opening front Panel for easy Fuse replacement

VR setting of Max and SFS are installed in the front panel, for easy adjustment

Multi-LED display panel makes the operating indications clear

The Auxiliary Powers (AC1, AC2) are independently controlled for all models

Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)

Top & bottom Shielding Covers are designed for safety and easy wiring installation

In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out

Main power is designed for 200-480VAC

Automatic power frequency detection for 50-60 Hz. No need for selection or switch

Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output

In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out

4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use

Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions

Using European detachable control signal connector for easy replacement without the need of re-wiring installation

Warranty: 1-Year from the date of purchase

Learn More
Quantity :

Minimum Order Quantity : 1 Order In Multiples of Quantity : 1

View as List Grid

Page

You're currently reading page 1
Page 2
Page 3
Page 4
Page 5
Page Next

SCR POWER REGULATORS

W5-TP4V-030-20J

W5-TP4V-030-21J

W5-TP4V-030-22J

W5-TP4V-030-23J

W5-TP4V-030-24J

W5-TP4V-030-25J

W5-TP4V-045-20J

W5-TP4V-045-21J

W5-TP4V-045-22J

Company

Services & Support

Resources

Resources