My Quote
Cart 0 () ()
₹0.00

WDR-480-24

Meanwell Single and Two Phase with Wide Input Voltage Range DIN Rail Mounting 480 Watts SMPS, Input: 180-550 Vac/254-780 Vdc; Output: 24 Vdc/0 - 20 Amps; Tol.: +/-1%; R&N: 100 mV; Effi.: 92%; WxHxD: 85.5x125.2x128.5mm

Manufacturer: Meanwell
Technical Datasheet:
Packaging Quantity: 1
Minimum Order Quantity: 2
Order in Multiples of Quantity: 1
Required Quantity:
Price on Request

Product Salient Features:

  • Single and Two Phase wide input range 180 to 550VAC
  • Built-in active PFC circuit compliance to BS EN/EN61000-3-2
  • High efficiency 91 % and low power dissipation
  • Protections: Short Circuit/Overload/Over Voltage/Over Temperature
  • UL508(industrial control equipment)approved
  • BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
  • Cooling by free air convection
  • Built-in DC OK Relay contact
  • 100% full load burn-in test
  • Warranty: 1-Year from date of purchase
Technical Data
Manufacturer: Meanwell
Series: WDR
Wattage: 480 W
Output Voltage (DC): 24 Vdc
Output Current (A): 0 - 20.0 A
Product Type: Single/Two Phase, Single Output SMPS
Mounting Type: DIN Rail Mounting
Input Voltage (AC): 180-550 Vac
Input Voltage (DC): 254-780 Vdc
Tolerance: +/-1%
Ripple & Noise (max.): 100mV
Efficiency (Typ.): 92.00%
Protections: Short Circuit, Overload, Over Voltage, Over Temperature
Cooling by: Free Air Convection
Safety Standards: UL508,AS/NZS 62368.1,EAC TP TC 004 approved,IEC62368-1 CB approved by SIQ,design refer to GL;(meet BS EN/EN60204-1)
EMC Emission: Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
Dimensions WxHxD (mm): 85.5x125.2x128.5mm
Weight/Piece (gms): 1700
Warranty: 1-Year
Special Notes

"Please refer above given PDF Data File/s for additional Product Technical & Dimensional information.

We shall not be liable for any technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the furnishing, performance or use of this material.

The Manufacturer reserves the right to modify technical or dimensional features in the interest of technological advances.

All Trademarks; Logos; Photographs and Product Information are the properties of their respective Owners”.