My Quote
Cart 0 () ()
₹0.00

TDR-240-24

Meanwell 3-Phase (Dual Phase operation possible) DIN Rail Mounting 240 Watts SMPS, Input: 340-550 Vac/480-780 Vdc; Output: 24 Vdc/0 - 10 Amps; Tol.: +/-1%; R&N: 100 mV; Effi.: 92%; WxHxD: 63x125.2x113.5mm

Manufacturer: Meanwell
Technical Datasheet:
Packaging Quantity: 1
Minimum Order Quantity: 1
Order in Multiples of Quantity: 1
Required Quantity:
Price on Request

Product Salient Features:

  • Three-Phase 340 to 550VAC wide range input (Dual Phase operation possible)
  • 63mm slim width
  • Built-in passive PFC function compliance to EN61000-3-2
  • High efficiency 92% and low power dissipation
  • Protections: Short circuit/Overload/Over Voltage/Over Temperature
  • Cooling by free air convection
  • Full Power between -30 to +60°C
  • Built-in constant current limiting circuit
  • UL61010 (industrial control equipment) Approved
  • EN61000-6-2 (EN50082-2) industrial immunity level
  • DC OK Relay contact
  • Warranty: 1-Year from date of purchase
Technical Data
Manufacturer: Meanwell
Series: TDR
Wattage: 240 W
Output Voltage (DC): 24 Vdc
Output Current (A): 0 - 10.0 A
Product Type: 3-Phase/2-Phase SMPS
Mounting Type: DIN Rail Mounting
Input Voltage (AC): 340-550 Vac
Input Voltage (DC): 480-780 Vdc
Tolerance: +/-1%
Ripple & Noise (max.): 100mV
Efficiency (Typ.): 92.00%
Protections: Short Circuit, Overload, Over Voltage, Over Temperature
Cooling by: Free Air Convection
Safety Standards: UL61010-1, UL61010-2-201, EN61558-1, EN61558-2-16, EAC TP TC 004 approved
EMC Emission: EN55032 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN55024, EAC TP TC 020, EN61000-6-2, heavy industry level
Dimensions WxHxD (mm): 63x125.2x113.5mm
Weight/Piece (gms): 1000
Warranty: 1-Year
Special Notes

"Please refer above given PDF Data File/s for additional Product Technical & Dimensional information.

We shall not be liable for any technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the furnishing, performance or use of this material.

The Manufacturer reserves the right to modify technical or dimensional features in the interest of technological advances.

All Trademarks; Logos; Photographs and Product Information are the properties of their respective Owners”.