+91 22 6633 7192
My Quote
Cart 0 () ()
₹0.00
All Categories

W5-TP4V-125-22J

Sipin 3-Wire 3-Phase Angle Controller (SCR Power Regulator); Main Power Voltage: 200-480 Vac; Normal Rated Current: 125 Amps; Auxiliary Power Source Code: 220 Vac; Input Signal Code: 2 to 10 VDC; Buffering Time Code: Adjustable 1 to 22 Seconds.

Manufacturer: Sipin
Technical Datasheet:
PDF-Icon W5-TP4V-125-22J
Packaging Quantity: 1
Minimum Order Quantity: 1
Order in Multiples of Quantity: 1
Required Quantity:
Price on Request

Product Salient Features:

  • Independent adjustment of Max and BIAS
  • Downward opening front Panel for easy Fuse replacement
  • VR setting of Max and SFS are installed in the front panel, for easy adjustment
  • Multi-LED display panel makes the operating indications clear
  • The Auxiliary Powers (AC1, AC2) are independently controlled for all models
  • Built-in buffering output adjustment (SFS VR), adjusting Range: 1-22 seconds (Only for the phase control product)
  • Top & bottom Shielding Covers are designed for safety and easy wiring installation
  • In case of 0.5 Hz sudden power losses, system output can be switched off immediately. Once the power is restored, the system will buffer the output to prevent the voltage surge for fuse blow out
  • Main power is designed for 200-480VAC
  • Automatic power frequency detection for 50-60 Hz. No need for selection or switch
  • Automatic detection and display for Power Out-of-Phase, SCR Over Heating, Fuse Blow Out with one set of alarm dry contact output
  • In cases of SCR Over Heating or Fuse Blow Out, the system output is stopped immediately. Once the malfunction is eliminated and power is restored, the system will buffer the output to prevent the fuse Blow Out
  • 4-20mA, 1-5VDC, 2-l0VDC, 0-20mA, 0-5 VDC, 0-l0VDC, dry contact points, etc. and all control signals are ready to use
  • Triggering circuit and the main board are designed separately to avoid the main board damage when main circuit malfunctions
  • Using European detachable control signal connector for easy replacement without the need of re-wiring installation
  • Warranty: 1-Year from the date of purchase
Technical Data
Manufacturer: Sipin
Series: W5-TP4V
Rated Current: 125 A
Control: 3-Wire 3-Phase Angle Control (without Neutral)
Main Power Voltage: 200-480 Vac
Auxiliary Power: 220 Vac
Input Signal: 2 - 10 VDC
Adjustable Buffering Time: 1 - 22 sec.
Dimensions LxWxH (mm): 288x140x205mm
Cooling by: Fan Cooling
Weight/Piece (gms): 5000
Warranty: 1-Year
Special Notes

"Please refer above given PDF Data File/s for additional Product Technical & Dimensional information.

We shall not be liable for any technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the furnishing, performance or use of this material.

The Manufacturer reserves the right to modify technical or dimensional features in the interest of technological advances.

All Trademarks; Logos; Photographs and Product Information are the properties of their respective Owners”.
Related Categories