Search
 
 
Crydom
Meanwell
 
Products
 
“Authorised Indian Distributor”
 
Following BaumerHubner Parts available from Shah Enterprise
 
Combinations
 
Combinations: Tachos/Encoders/Overspeed Switches

The Baumer Hübner combinations are characterized by a common shaft with bearings at both ends and at least one sensor system mounted between the bearings.

This fundamental principle applies in all cases except those printed in the overview, where design considerations require a modified solution.

The same goes for some of the Triple Combinations, where the 3rd device is connected to the shaft by an internal coupling.

 
 
 
Servo flange
small size
continuous shaft

OG 60 + GT 5

Incremental encoder OG 60 with LongLife-DC-Tachogenerator GT 5
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 450 g
Protection class: IP 54
GT 5: 7 to 10 mV/rpm
 
 
Technical Specification
 
EURO-Flange B10; shaft d= 11 mm
Continuous shaft

FOG 9 + GT 7

Incremental encoder FOG 9 with LongLife-DC-Tachogenerator GT 7
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 1.1 kg
Protection class: IP 55
GT 7: 10 to 60 mV/rpm
 
Technical Specification
 
 
EURO-Flange B10; shaft d= 11 mm
Continuous shaft

POG 9 + FSL / POG 9 + ESL

Incremental encoder POG 9 with mechanical speed switch FS(L) 90 or with electronic speed switch ES(L) 90 or ES(L) 93
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.6 kg
Protection class: IP 55
FS(L) 90: 700 - 4900 rpm
ES(L) 90: 650 - 6000 rpm
ES(L) 93: 3 x 200 - 5000 rpm
 
 
Technical Specification
 
EURO-Flange B10; shaft d= 11 mm
Continuous shaft

POG 90 + OG 9 / POG 90 + FSL / POG 90 + ESL

Incremental encoder POG 90 with incremental encoder OG 9, with mechanical speed switch FS(L) 90 or with electronic speed switch ES(L) 90 or ES(L) 93
Shockproof to: 1000 m/s2 (6 ms)
Weight: ca. 2,6 kg
Protection class: IP 55
FS(L) 90: 700 - 4900 rpm
ES(L) 90: 650 - 6000 rpm
ES(L) 93: 3 x 200 - 5000 rpm
 
Technical Specification
 
 
Hollow-shaft with clamping device
up to d= 16 mm
programmed with the provided software

HOG 10 + DSL Incremental encoder HOG 10 with integrated Digital Speed Switch

Supply voltage: +15 .. +30V DC max 200 mA (DSL.R)
+9 .. +30V DC max 200 mA (DSL.E)
Permissible encoder temperature -30°C to +85°C
Maximum speed (mechanical): 6000 rpm
Protection class: IP 66
Weight: approx. 3.1 kg
Square-wave cycles per turn z = 512; 1024; 2048; 2500 
Switching speeds: z = 512: ±16 ... ± 6000 rpm
z = 1024: ± 8 ... ± 6000 rpm
z = 2048: ± 4 ... ± 3500 rpm
z = 2500: ± 3 ... ± 2900 rpm
Response time: max. 40 ms
Version DSL.R suitable for operation with an external
relay module DS 93 R
Version DSL.E Version with three internal electronic relays
 
Technical Specification
 
Hollow shaft with clamping device up to d= 16 mm
Option: cone 1:10
Continuous shaft

HOG 10 + FSL / HOG 10 + ESL

Incremental encoder HOG 10 with mechanical speed switch FS(L) 90 or with electronic speed switch ES(L) 90 or ES(L) 93
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.5 kg
Protection: IP 55
FS(L) 90: 700 - 4900 rpm
ES(L) 90: 650 - 6000 rpm
ES(L) 93: 3 x 200 - 5000 rpm
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Technical Specification
 
 
EURO-Flange B10;
shaft d= 11 mm
programmed with the provided software

POG 10 + DSL Incremental encoder POG 10 with integrated Digital Speed Switch

Supply voltage: +15 .. +30V DC max 200 mA (DSL.R)
+9 .. +30V DC max 200 mA (DSL.E)
Response time: max. 40 ms
Version DSL.R suitable for operation with an external
relay module DS 93 R
Version DSL.E Version with three internal electronic relays
 
Hollow-shaft with clamping device
up to d= 16 mm
programmed with the provided software

HOG 10 + DSL Incremental encoder HOG 10 with integrated Digital Speed Switch

Supply voltage: +15 .. +30V DC max 200 mA (DSL.R)
+9 .. +30V DC max 200 mA (DSL.E)
Permissible encoder temperature -30°C to +85°C
Maximum speed (mechanical): 6000 rpm
Protection class: IP 66
Weight: approx. 3.1 kg
Square-wave cycles per turn z = 512; 1024; 2048; 2500 
Switching speeds: z = 512: ±16 ... ± 6000 rpm
z = 1024: ± 8 ... ± 6000 rpm
z = 2048: ± 4 ... ± 3500 rpm
z = 2500: ± 3 ... ± 2900 rpm
Response time: max. 40 ms
Version DSL.R suitable for operation with an external
relay module DS 93 R
Version DSL.E Version with three internal electronic relays
 
Technical Specification
 
 
EURO-Flange B10; shaft d= 11 mm
Continuous shaft

POG 10 + FSL / POG 10 + ESL

Incremental encoder POG 10 with mechanical speed switch FS(L) 90 or with electronic speed switch ES(L) 90 or ES(L) 93
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.7 kg
Protection class: IP 55
FS(L) 90: 700 - 4900 rpm
ES(L) 90: 650 - 6000 rpm
ES(L) 93: 3 x 200 - 5000 rpm
 
Technical Specification
 
EURO-Flange B10; shaft d= 11 mm
Continuous shaft

POG 11 + FSL / POG 11 + ESL

Incremental encoder POG 11 with mechanical speed switch FS(L) 90 or with electronic speed switch ES(L) 90 or ES(L) 93
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.7 kg
Protection class: IP 67
FS(L) 90: 700 - 4900 rpm
ES(L) 90: 650 - 6000 rpm
ES(L) 93: 3 x 200 - 5000 rpm
 
Technical Specification
 
 
Hollow shaft with clamping ring
up to d= 50 mm
programmed with the provided software

HOG 16 M + DSL

Redundant Incremental encoder HOG 16 with integrated Digital Speed Switch
Supply voltage: Version DSL.R: +15 ... +30 V DC
Version DSL.E: +9 ... +30 V DC
Permissible encoder temperature -20 °C ... +85 °C
Maximum speed (mechanical): 6000 rpm
Protection class: IP 66
Weight: approx. 4 kg
Square-wave cycles per turn z = 512; 1024; 2048; 2500
Switching speeds: z = 512: ±16 ... ± 6000 rpm
z = 1024: ± 8 ... ± 6000 rpm
z = 2048: ± 4 ... ± 3500 rpm
z = 2500: ± 3 ... ± 2900 rpm
Response time: max. 40 ms
Version DSL.R suitable for operation with an external
relay module DS 93 R
Version DSL.E Version with three internal electronic relays
 
Technical Specification
 
EURO-Flange B10; shaft d= 11 mm
Internal coupling

TDP 0,2 + OG 60

Analog-Tacho TDP 0,2 with Incremental encoder OG 60
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 3 kg
Protection class: IP 55
TDP 0,2: 10 - 150 mV/rpm
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Technical Specification
 
 
EURO-Flange B10; shaft d= 11 mm
Common shaft

TDP 0,2 / TDPZ 0,2 + OG 9

Analog-Tacho TDP 0,2 / Twin-Tacho TDPZ 0,2 with Incremental encoder OG 9
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 3 kg
Protection class: IP 55
TDP 0,2: 10 - 150 mV/rpm
OG 9:   1 -> 1250 counts per turn  
   HTL; TTL; TTL (R)  
 
Technical Specification
 
Flange D= 85 mm; shaft d= 11 mm
Common shaft

TDP 0,09 + FSL

Analog-Tacho TDP 0,09 with mechanical speed switch FS(L) 90
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 1.5 kg
Protection class: IP 55
TDP 0,09: 10 - 60 mV/rpm
FS(L) 90: 700 -> 4900 rpm
 
 
Technical Specification
 
 
EURO-Flange B10; shaft d= 11 mm
Common shaft

TDP 0,2 + FSL

Analog-Tacho TDP 0,2 with mechanical speed switch FS(L) 90
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.9 kg
Protection class: IP 55
TDP 0,2: 10 - 150 mV/rpm
FS(L) 90: 700 -> 4900 rpm
 
 
Technical Specification
 
EURO-Flange B10; shaft d= 11 mm
Common shaft

TDP 0,2 + ESL

Analog-Tacho TDP 0,2 with electronic speed switch ES(L) 90 / 93
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.9 kg
Protection class: IP 55
TDP 0,2: 10 - 150 mV/rpm
ES(L) 90: 650 -> 6000 rpm
ES(L) 93: 3 x 200 -> 5000 rpm
 
Technical Specification
 
 
EURO-Flange B10; shaft d= 11 mm
Common shaft

TDPZ 0,2 + FSL / ESL

Analog-Tacho TDP 0,2 with electronic speed switch ES(L) 90 / 93 or mechanical speed switch FS(L) 90
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 2.9 kg
Protection class: IP 55
TDP 0,2: 10 - 150 mV/rpm
ES(L) 90: 650 -> 6000 rpm
ES(L) 93: 3 x 200 -> 5000 rpm
FS(L): 700 -> 4900 rpm  
 
Technical Specification
 
Hollow shaft with clamping ring up to d= 110 mm
for rolling mills 
for low speeds
Internal coupling

HOG 22 + HTA 11 + ES 100

Incremental encoder HOG 22 with LongLife-DC-Tachogenerator HTA 11 and speed switch ES 100
Shockproof to: 1000 m/s2 (6 ms)
Weight: approx. 15 kg
Protection class: IP 54
HTA 11: 20 - 100 mV/rpm
ES 100: 110 - 500 rpm
 
 
 
Back Top
 
 
293 Princess Street,
#S/3 Sopariwala House,
Mumbai - 400 002, India.
 Tel : 91 22 6633 7192 / 2201 3085
Fax : 91 22 2205 0453
Email :shahent@vsnl.com
 
 © Copyright 2007, Electrowebstore.com. All rights reserved. Site Designed & Maintained by Digital Arts A Web Design Company